Fab King - Fabrication Center that can be used as Radial Arm Polishing, Sink Cut Out Machine, Drill Press, and Stone Router
The Fab King Fabrication Center is an all in one piece of fabrication equipment. The Fab King combines a stone router, polisher, and sink cut out machine into one. The Fabrication Center from RYE-Corp builds off of the success of the Scorpion and feedback from granite fabricators across the country. The result is the next step in counter top fabrication equipment. The Fab King uses a 3hp motor with a more rigid cantilever frame for increased stability.
Fab King Fabrication Center
It's engineered for efficiency, simplicity and reliability to ensure profitability for its users.
The system allows for the use of Master/Sector tooling for edge profiling and also increases the router travel to 9 feet.
Edge profiling are quick and easy with no threat of scratching the surface.
Gantry movement insures smooth travel for the X and Y axis
You can Polish Backsplashes
Can cut out any sink shape using a template in as a little as 8 minutes
240 Volt Three Phases
3 HP Motor
Variable Speed 2,700 to 10,000 RPM
Dust Free Operation
center and halo water feed
Install very easy
Water consumption 2 Gallons per minutes, ideally below 10 microns purity.